4:3 IT CCD
IT CCD has a smear level of -125 dB, which is ideal in almost every situation

12 bit Advanced Digital Signal Processing (ADSP)
Allows enhanced dynamic range, better tonal reproduction and the addition of many other software features

TruEye processing
The TruEye processing feature manages video signal data according to three factors- brightness, hue and saturation- so that with a wide dynamic range signal, colour can be reproduced as faithfully as by the human eye, by eliminating the hue factor distortion.

Optional SDI output board.
Allows the rear video out socket to be either analogue composite or SDI, selectable by a menu.

Optional Picture Cache memory board.
Now you need never miss a picture again, this board stores up to 8 seconds of audio and video in solid state memory. Thus an event up to 8 seconds previous to the time when you pressed the rec start button is available. It is selectable to be 1, 2, 4 or 8 seconds. For example a store of 4 seconds gives effectively an instant start from standby off position.

Internal 50 watt stabilised light system.
This stabilised internal light system can be powered from the camcorder’s lithium-ion battery. The light can be switched on/off either manually or automatically, where the light goes on when you start recording and off when you stop recording.

Turbo gain up to 48 dB.
Allows working down to 0.2 lux, better than the colour capability of the human eye.

Auto trace white system.
The ATW function makes it possible to automatically adjust the white balance as lighting conditions change. This function is useful when shooting in rapidly changing lighting conditions (for example, when moving from an indoor to an outdoor location). Conventional Auto white balance is also available both instead of and in addition to ATW operation. White B preset position is assigned for ATW operation by selecting either ATW or AWB B in the VF menu.

Dial in colour temperature.
You can now programme the camera to a certain colour temperature, and then light to that, rather than using preset positions or auto white balance with gels to offset the balance. Also added is an offset function to slightly warm or cool a picture irrespective of the auto white setting, since the offset is removed before auto white and then added back in again when auto white is completed.

Built in film gamma curve
The F gamma represents the average transfer characteristic of various film stocks, and has a shallow slope in the dark areas leading to slight lifting of the very dark areas, and flattens off the highlights, to give a higher dynamic range. Programmable S gamma is also available.

Multi matrix feature.
This allows any colour to be grabbed, and its hue and saturation to be altered within a range of around 20 degrees, and the saturation almost to nil. In this way many "in camera" effects can be made.

Cameraman programmable menu system.
This allows every cameraman to make his own menu structure, by copying any single menu item from any other page and pasting it into your own page, which can then be stored on a setup card.

Operational Manual

Lens cap

Shoulder belt

Microphone

XLR cap x 4

Motorised filter wheel option	BKDW-701
SDI output board	BKDW-702
Cache memory board for loop record function	BKDW-703
Viewfinder rotation bracket	BKW-401
Setup card	BSC-1
Wireless receiver to mount onto the back of the camcorder with a bracket	WRR-860A
Tripod adapter	VCT-14
Battery charger for 4 Li-ion batteries with much reduced charging time, and also with a 4 pin XLR output	BC-L120CE
Battery charger for 2 lithium ion batteries	BC-L50CE
Lithium ion battery 77.8 watt capacity	BP-L60A
Lithium ion battery 116.6 watt capacity	BP-L90A
Flight case	LC-777
Adapter to add SDI output and add audio channels 3 and 4 input. Therefore allows individual 4 channel audio recording	CA-701
Adapter to allow SDI output, external SDI or composite input signal recording on the tape and a 26 pin interface for simultaneous recording on a BVW-50 or DVW-250 portable recorder.	CA-702P
Adapter to allow a triax interface with a CCU-550AP or CCU-700AP with RCP control in a studio camera configuration	CA-755P
Remote control	RM-B150
38 watt mains v-shoe power supply to fit between camcorder and battery. If mains lead is removed, power is fed from the battery automatically. Can also charge a Li-ion battery to 80%.	AC-DN1
150 watt mains v-shoe power supply to fit between camcorder and battery. If mains lead is removed, power is fed from the battery automatically. Can also charge a Li-ion battery to 80%. Has extra 4 pin XLR output.	AC-DN2B
1.35" LCD colour viewfinder CONTACT INFORMATION: TEL:+44 (0)208 339 6047        +44 (0)844 873 5652 Fax :+44 (0)844 873 5653 Email: sales@digibroadcast.com	BVF-VC10W